Suzuki Ozark 250 2013 specs
Below are some specifications of the Suzuki Ozark 250 2013 model
ATV Type :
Utility Quad Bikes
Engine Capacity (cc / Ci ) :
246 / 15.01
Valve Configuration :
2-valves
Engine Cylinders :
Single-Cylinder
Bore Stroke(mm) :
66mm x 72mm
Bore Stroke(in) :
2.6in. x 2.84in.
Compression Ratio :
9.2:1
Fuel System Brand :
Mikuni
Ignition :
Electric / Pull
Brakes Front :
Dual Hydraulic Disc
Front Brake Diameter (mm / in.) :
160 / 6.3
Front Suspension :
Independent Double A-Arm
Suspension - Front Travel (mm / in.) :
140 / 5.5
Front Adjustable Fork Pre-Load :
No
Front Adjustable Rebound Damping :
No
Suspension Rear :
Swing Arm
Suspension Rear - Material :
Steel
A-Arm Skid Plate (Rear) :
No
Rear Travel (mm / in.) :
140 / 5.5
Rear Adjustable Rebound Damping :
No
Rear Adjustable Shock Spring Pre-Load :
No
Number of Rear Shock Absorbers :
1
Length (mm / in.) :
1801 / 70.92
Width (mm / in.) :
1044 / 41.1
Height (mm / in.) :
1069 / 42.1
Ground Clearance (mm / in.) :
211 / 8.3
Wheelbase (mm / in.) :
1140 / 44.9
Wet Weight (Lbs. / Kg) :
428 / 194
Transmission (Gearbox) and Final Drive
Transmission :
Manual / Automatic Clutch
Primary Drive - Rear Wheels :
Shaft
Tires Front :
Dunlop AT 22 X 7-11
Front Tire Diameter (in) :
22
Front Tire Width (in) :
7
Front Rim Diameter (in) :
11
Tires Rear :
Dunlop AT 22 X 10-9
Rear Tire Diameter (in) :
22
Rear Tire Width (in) :
10
Rear Rim Diameter (in) :
9
Fuel Tank Capacity (l / gal.) :
9.7 / 2.6
Underseat Storage :
Standard
Seat Height (mm / in.) :
785 / 30.9
Towing Capacity (Kg / Lbs.) :
330.2 / 728
Halogen Headlights :
Standard
Exterior - Safety and Design
Floor Board Location :
Driver
Foot Peg Location :
Driver
Front Fender Flairs :
Standard
Front Stabilizer Bar :
No
Full Length Skid Plate :
Yes
Rear Fender Flairs :
Standard
Manufacturer and Warranty
Manufacturer Country :
Japan
Recommend Minimum Age :
16